View document on multiple pages.
You can also view this document as a printable PDF.
You can also view this document as a printable PDF.
- 1. Overview
- 2. Windows Drivers and Installation Instructions
- 3. Mac OS X Drivers
- 4. Linux Installation
1. Overview
We use the Silicon Labs CP2102 USB-to-UART Bridge Controller in several of our products to provide USB connectivity while communicating via a simple serial protocol. It is the key component of our Pololu USB-to-serial adapter:
CP210x Driver XP, S2K3, Vista, Windows 7, 8 and 10 Posted by - NA -, Last modified by Gianluca Tedone on 23 May 2017 08:26 AM Install these drivers to support Matrix, Drak, Iris, Puck Pro and Dive Link USB interfaces on your PC.
Pololu USB-to-serial adapter with CP2102 |
---|
and is also used in our Orangutan USB Programmer, USB 16-Servo Controller, and Orangutan X2. These CP2102-based products feature a mini-B connector, so you will need a USB A to mini-B cable to connect them to one of your computer’s USB ports. Once the appropriate drivers are installed for your system, the CP2102 will look like a standard serial port. This document provides you with the necessary drivers along with installation instructions.
2. Windows Drivers and Installation Instructions
Before you connect your Pololu CP2102 device to a computer running Microsoft Windows, you should install its drivers:
- Download the CP2102 drivers for Windows (4MB zip).
- IMPORTANT: You must extract the zip archive into a temporary directory. attempt to double-click or run any of the files until you have extracted them.
- Open the temporary directory and run the appropriate executable. If you have a 64-bit operating system, you should run pololu-cp2102-setup-x64.exe. If you have a 32-bit operating system, you should run pololu-cp2102-setup-x86.exe.
- During the installation, Windows will ask you if you want to install the drivers. Click “Install” (Windows 10, 8, 7, and Vista) or “Continue Anyway” (Windows XP).
- The installer should complete successfully.
Windows 10, Windows 8, Windows 7, and Windows Vista users: Your computer should now automatically install the necessary drivers when you connect a Pololu CP2102 device. No further action from you is required.
Windows XP users: You need to follow steps 6–10 for each new device you connect to your computer.
- Connect the device to your computer’s USB port. Your computer will detect the new hardware and open the Found New Hardware Wizard.
- When the Found New Hardware Wizard is displayed, select “No, not this time” and click “Next”.
- On the second screen of the Found New Hardware Wizard, select “Install the software automatically” and click “Next”.
- Windows XP will warn you again that the driver has not been tested by Microsoft and recommend that you stop the installation. Click “Continue Anyway”.
- When you have finished the Found New Hardware Wizard, click “Finish”.
If you now go to your computer’s Device Manager and expand the “Ports (COM & LPT)” list, you should see “Pololu USB-to-Serial Adapter” as one of the COM ports.
Windows 8 device manager showing a Pololu CP2102 device. |
---|
Some software will not allow connection to higher COM port numbers. If you need to change the COM port number assigned to your USB adapter, you can do so using the Windows device manager. Bring up the properties dialog for the “Pololu USB-to-Serial Adapter” COM port and click the “Advanced…” button in the “Port Settings” tab. From this dialog you can change the COM port assigned to your device.
3. Mac OS X Drivers
To use the CP2102 on a computer running Mac OS X, you should download and install the CP210x USB to UART Bridge VCP Drivers from Silicon Labs for Mac OS X.
Additionally, we have older drivers that other customers have used successfully on both PowerPC- and Intel-based Macs running OS X version 10.3.9 or later, but these probably will not work on version 10.7 or later. You can download these drivers here: OSX_cp2102_drivers.dmg (723k dmg)
Mac OS X compatibility: We have confirmed that our CP2102-based devices work on Mac OS X 10.7 and other customers have used them successfully on older versions. We can assist with advanced technical issues, but most of our tech support staff does not use Macs, so basic support for Mac OS X is limited.
4. Linux Installation
Recent versions of the linux kernel include support for the CP2102 USB-to-UART Bridge Controller as part of the usb-serial driver, so your Pololu CP2102 should work right out of the box. We have verified that the CP2102 works with Ubuntu versions 7.04 and 8.04. If you experience any problems, we recommend you upgrade to the most recent version of your distribution.
Related products
Orangutan USB Programmer |
Pololu USB 16-Servo Controller |
Pololu USB-to-Serial Adapter |
Orangutan X2 with VNH3 |
There are a number of UART drivers which had been brought to market by Silicon Labs. Below you will find the most common UART drivers which are downloaded from the internet. Like any other software it is best to check your version of your driver first before you install another. If this is newer then the software will simply over right the current older driver.
You can also search this website for the FT232R USB driver which is another driver which you can view. There is also a good explanation in how to setup the drivers for the UART. Read that for more guidance.
Silicon CP210x USB to UART Bridge VCP Driver 6.5.3
This is a very old piece of equipment however it is still in use today. This updated driver fixed a memory leak in the earlier software for the hardware. The driver also fixed the BSOD corner case for a write cancellation on the equipment. There was also a bug fix done as the update of the software did not always update correctly. Below is the Windows version as well as a Linux version. Note that tis driver was released in 2012.
Windows : Silicon CP210x USB to UART Bridge VCP Driver
Linux: Silicon CP210x USB to UART Bridge VCP Driver
VN:F [1.9.22_1171]
VN:F [1.9.22_1171]
Silicon Labs UART Drivers, 10.0 out of 10 based on 1 rating Incoming Search Terms:
Related Posts
- Common UART problems (1.000)
- FT230X – Full Speed USB to Basic UART (1.000)
- FT231X – Full Speed USB to Full UART (1.000)
- UART Drivers (1.000)
- ASUS VivoBook 17 F712FA UART Driver Win 10 64-bit (1.000)